Heat Exchanger

Heat Exchanger

Our brazed plate heat exchangers transfer heat energy from one side to another without the two products on either side mixing. So you can install them between the heat pump with the central heating systems. The application of these plate heat exchangers allows for system optimization with minimal heat loss. Additionally there is an opportunity of increasing the effect of the whole heat transfer. In some instances it may be preferable to limit the amount of glycol which is held in the overall heating circuit, the easiest way to provide this limit is to employ a heat exchanger.

The plate has 4 x ¾” bsp male fittings, you will need ¾ female to 22mm compression x 4 to connect to these and increase pipe size to 28mm.

 

Submit a Quote Request Buy Now